Extent and Pattern of Digital Technology Adoption among Contractors and Consultants in North East Nigeria
DOI:
https://doi.org/10.64321/jcr.v3i6.05Keywords:
technology adoption; digital construction; BIM; firm size; contractors; consultants; North East NigeriaAbstract
Digital technologies can improve coordination, documentation, and control in construction, but evidence on how far they have been adopted in North East Nigeria, a region engaged in post-conflict reconstruction, is limited. This study assessed the extent and pattern of technology adoption among contractor and consultant firms in Adamawa, Bauchi, and Borno States and tested whether adoption differs by firm size. A cross-sectional survey was administered to a proportionate stratified random sample of 187 registered firms drawn from a frame of 350, yielding 149 valid responses (82.4% response rate). Twelve technologies were rated on a five-point scale and analysed with means, standard deviations, rankings, and one-way ANOVA. Overall adoption was moderate (M = 3.06, SD = 0.968) and fell into three tiers. Foundational tools were most adopted: project management software (M = 3.64), mobile applications for site communication (M = 3.52), and digital documentation (M = 3.41). Cloud collaboration, automated scheduling, cost estimation software, and cross-phase integration were moderate and more variable (M = 2.97 to 3.28). Building Information Modelling (M = 2.84), drones (M = 2.71), IoT sensors (M = 2.53), augmented reality (M = 2.38), and artificial intelligence (M = 2.21) were marginal. Adoption differed significantly by firm size, F(2, 146) = 13.42, p < 0.001, η² = 0.155, with large firms (M = 3.81) well ahead of medium (M = 3.34) and small firms (M = 2.76). The study recommends staged, low-cost digital upgrading, skills training, and infrastructure and financing support targeted at small firms.
References
1) Abubakar, A., Ibrahim, Y. M., & Adamu, A. D. (2014). Barriers to the adoption of building information modeling in the Nigerian construction industry. Journal of Construction Engineering and Project Management, 4(2), 8–15.
2) Acheampong, A., Aigbavboa, C., Oke, A., & Thwala, W. (2025). Barriers to artificial intelligence adoption in the Nigerian construction industry. Journal of Engineering, Design and Technology. Advance online publication.
3) Aghimien, D., Aigbavboa, C., & Thwala, W. (2022). Barriers to the adoption of digital technologies in the Nigerian construction industry. Construction Innovation, 22(4), 789–808.
4) Bala, K., Bello, A. B., & Bustani, S. A. (2021). Post-conflict reconstruction in North East Nigeria: Challenges and opportunities for sustainable development. Journal of Sustainable Development in Africa, 23(2), 45–62.
5) Barney, J. (1991). Firm resources and sustained competitive advantage. Journal of Management, 17(1), 99–120.
6) Creswell, J. W., & Creswell, J. D. (2018). Research design: Qualitative, quantitative, and mixed methods approach (5th ed.). SAGE Publications.
7) Eastman, C., Teicholz, P., Sacks, R., & Liston, K. (2011). BIM handbook: A guide to building information modeling for owners, managers, designers, engineers and contractors (2nd ed.). John Wiley & Sons.
8) Enegbuma, W. I., Ali, K. N., & Dodo, Y. A. (2014). Factors influencing BIM adoption in the Nigerian construction industry. Journal of Information Technology in Construction, 19, 235–251.
9) Ghosh, A., Edwards, D. J., & Hosseini, M. R. (2020). Internet of things (IoT) in construction: A systematic review. Journal of Engineering, Design and Technology, 18(6), 1721–1743.
10) Hair, J. F., Hult, G. T. M., Ringle, C. M., & Sarstedt, M. (2021). A primer on partial least squares structural equation modeling (PLS-SEM) (3rd ed.). SAGE Publications.
11) Ibem, E. O., & Laryea, S. (2015). An empirical study of the use of information and communication technology (ICT) in the Nigerian construction industry. Journal of Information Technology in Construction, 20, 1–20.
12) Ibrahim, Y. M. (2024). Training and skills development for digital construction in Nigeria. Journal of Construction Education, 19(1), 34–50.
13) Kumar, N., Stern, L. W., & Anderson, J. C. (1993). Conducting interorganisational research using key informants. Academy of Management Journal, 36(6), 1633–1651.
14) Nnaji, C., & Karakhan, A. A. (2020). Technologies for safety and health management in construction: Current use, implementation benefits and limitations, and adoption barriers. Journal of Building Engineering, 29, Article 101212.
15) Oke, A. E. (2024). Digital transformation challenges in the Nigerian construction industry. Journal of Information Technology in Construction, 29, 245–262.
16) Olanrewaju, O. I., Tan, S. Y., & Kwan, J. H. (2020). Digital technology adoption among construction SMEs in Nigeria. Journal of Engineering, Design and Technology, 18(5), 1283–1302.
17) Onungwa, I. O., Olugu, U. D., & Udoudoh, F. P. (2017). Building information modelling (BIM) implementation in Nigeria: Challenges and prospects. Journal of Information Technology in Construction, 22, 74–88.
18) Rogers, E. M. (2003). Diffusion of innovations (5th ed.). Free Press.
19) Sacks, R., Girolami, M., & Brilakis, I. (2020). Building information modelling, artificial intelligence and construction tech. Developments in the Built Environment, 4, Article 100022.
20) Sacks, R., Koskela, L., Dave, B. A., & Owen, R. (2010). Interaction of lean and building information modeling in construction. Journal of Construction Engineering and Management, 136(9), 968–980.
21) Saunders, M., Lewis, P., & Thornhill, A. (2019). Research methods for business students (8th ed.). Pearson Education.
22) Small and Medium Enterprises Development Agency of Nigeria. (2019). SMEDAN national survey of micro, small and medium enterprises (MSMEs). SMEDAN.
23) Tornatzky, L. G., & Fleischer, M. (1990). The processes of technological innovation. Lexington Books.
24) Uakarn, C., Chaokromthong, K., & Sintao, N. (2021). Sample size estimation using Yamane and Cochran formulas for survey research. Journal of Educational Research and Review, 9(1), 1–7.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Salihu Muhammad Mari

This work is licensed under a Creative Commons Attribution 4.0 International License.